Features and Benefits of 1-5/8" Flex-Hone, 180 Grit

• The BC 1 - 5/8 inch Flex-Hone surface finishing and deburring tool is designed for nominal bore sizes between 0.938 IN and 1.625 IN. This tool features 3.00 IN of abrasive globules which are composed of 180 grit Silicon Carbide and are excellent for mild steel, stainless steel and cast iron. 180 grit generally provides an Ra Finish range of 30 - 40 Microinch (.7 - 1 Micrometer). Significant changes in surface finish may require multiple grits to achieve the desired result. Overall tool length is 8 IN long and has a twisted wire stem for use in any collet, chuck, or similar holding device. The maximum speed for this diameter tool is between 900 - 1000 RPM and a general feed rate of 150 - 250 ipm. Flex-Hone Tools are produced in an oversized condition by the manufacturer. Always order by your nominal bore diameter. If your nominal bore size is between standard sizes, order the next larger size.
• The Flex-Hone Tool is a resilient, flexible honing tool used to improve the internal surface finish while also being able to deburr a bore or cylinder. It is comprised of abrasive globules laminated onto the ends of flexible nylon filaments. Its unique construction allows the tool to be self-aligning, self-centering and self-compensating for wear. The tool provides the benefit of removing loose, torn and folded metal and creating a substantial flat or plateau surface. An additional important application for the Flex-Hone Tool is burr removal from cross-drilled holes and slots. The Flex-Hone is designed for a variety of automotive, hydraulic, pneumatic and industrial applications in sizes from 4mm – 36'. The plateau finish achieved by the tool will provide better oil retention and sealing surfaces without changing bore geometry. Brush Research Manufacturing embraced the benefits of plateau finish and pioneered the concept of plateau honing, culminating in the introduction of the Flex-Hone Tool in 1972. The Flex-Hone Tool was originally created to deglaze cylinder walls in automotive applications and has gained many nicknames over the years including ball hones, flexihone, dingleberry hone, bead brush, glaze breaker, and glaze buster.
• In general, when operating, always have the tool rotating before entering the bore and direction of revolutions should not change while inside the piece. To avoid damage to the tool and maintain operation safety, do not run the tool at high speeds while unsupported outside of the intended bore. Do not apply a side load to the shank or stem and do not exceed manufacturer's recommendation for speed of rotation. Speed should be reduced on entry and exit of the intended bore to avoid any oscillation which may compromise the integrity of the shank or stem. Always use with ample lubricant or honing oil, do not use solvents.

Produces a controlled surface condition unobtainable by any other method. A resilient, flexible, honing tool with a soft cutting action. The abrasive globules each have independent suspension that assures the FlexHone to be self-centering, self-aligning to the bore, and self compensating for wear.




WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

FREE SHIPPING POLICIES

How FREE is it?
Shipping is free on orders being delivered to the 48 contiguous states, which excludes Alaska, Hawaii and Puerto Rico. But don't worry, Tooldom can still ship to these states. Please contact us via email or telephone to inform you of the additional charges.

Additional details for Orders shipping to Hawaii and Alaska
Please note that some items cannot be shipped outside of the continental United States. We reserve the right to cancel shipments to Hawaii, Alaska or Puerto Rico. We will, of course, contact you in the event that we cannot ship one or more of your items.

We do not ship internationally.
We only ship to locations within the United States, see map below.

Returns
Returns of new, unused items in their original packaging and in resellable condition are accepted within 30 days of purchase. You must request an RGA for your return from our customer service department prior to your return. If 30 days have gone by since your purchase, unfortunately, the item is not returnable.

To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Returns are subject to a restock fee of up to 50% depending on the condition.

Several types of goods are exempt from being returned. We also do not accept products that are sanitary goods, hazardous materials, or flammable liquids or gases.

Additional non-returnable items:

• Gift cards
• Software updates
• Scanners
• Electronic Diagnostic tools
• Items that require registration to be used and have been opened or registered

To complete your return, we require a receipt or proof of purchase.

Please do not send your purchase back to the manufacturer.

There are certain situations where only partial refunds are granted (if applicable):

• Book with obvious signs of use 
• CD, DVD, VHS tape, software or cassette tape
• Any item not in its original condition is damaged or missing parts for reasons not due to our error
• Any item that is returned more than 30 days after delivery

Refunds (if applicable)
Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

If you are approved, then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 10 business days.

Late or missing refunds (if applicable)
If you haven’t received a refund yet, first check your bank account again.

Then contact your credit card company, it may take some time before your refund is officially posted.

Next, contact your bank. There is often some processing time before a refund is posted.

If you’ve done all of this and you still have not received your refund yet, please contact us at

contact form

Sale items (if applicable)
Only regular priced items may be refunded, unfortunately, sale items cannot be refunded.

Exchanges (if applicable)
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email via our online contact form, or calling us at +1(800) 764-9313 for return instructions.

Gifts
If the item was marked as a gift when purchased and shipped directly to you, you’ll receive a gift credit for the value of your return. Once the returned item is received, a gift certificate will be mailed to you.

If the item wasn’t marked as a gift when purchased, or the gift giver had the order shipped to themselves to give to you later, we will send a refund to the gift giver and they will be notified regarding the return.

Shipping Returns Address
To return your product, you should contact us for mailing instructions.

You will be responsible for paying shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

Depending on where you live, the time it may take for your exchanged product to reach you may vary.

If you are shipping an item over $75, you should consider using a trackable shipping service and purchase shipping insurance. Proof of delivery will be requested if we do not receive an item you shipped to us in order that we may investigate the missing item.